Garage Floor & Epoxy Coatings in Cleburne, Texas

Four bonded layers over diamond-ground concrete — garage floors, shop slabs, and patios across Cleburne and Johnson County, installed in about two days.

Get My Free Quote Call (817) 575-1024
Serving Cleburne & Johnson County

Honest Floors for the County Seat

Cleburne concrete has usually seen some things — older garages near downtown with fifty years of stains and cracks, shop slabs dusted with everything a working building throws at them, and newer builds out toward the Chisholm Trail Parkway. Our job is the same on all of them: diamond-grind the surface honest, repair the cracks, and build a four-layer epoxy coating system that's sealed under a UV-stable polyaspartic topcoat. Flake floors run a flat $9 per square foot, quartz $15, with prep and repair included.

We're a Fort Worth contractor — about 30 minutes up the parkway, not a national franchise — and we cover every corner of Johnson County, from Joshua and Godley to Grandview, Rio Vista, Keene, and Alvarado. Pick your flake or quartz colors, and most floors are done two days after we roll up.

(817) 575-1024
Get My Free Cleburne Quote

Where we install around Cleburne

Cleburne Joshua Godley Keene Grandview Rio Vista Alvarado Lake Pat Cleburne

What we coat

Garage floors Shops & metal buildings Barns Patios Laundry rooms Commercial concrete

What We Coat in Cleburne

County-seat garages, working shops, and everything on a slab in between.

Two-car garage with a glossy blue flake epoxy floor

Garage Floors

Old slabs ground honest, new slabs protected early

Large shop floor with a flake coating system

Shops & Metal Buildings

Big Johnson County slabs that clean up in minutes

Covered patio with a tan flake floor coating

Patios

UV-stable finishes that won't chalk in the Texas sun

Interior floor finished with a decorative flake coating

Laundry & Utility

Sealed floors for the rooms that do the dirty work

Browse All Floor Colors Get My Free Quote
Why DFW Coatings

Prep Is the Job — The Rest Is Finish

Anyone can roll product on a floor. What decides whether a coating lasts fifteen years or fifteen months is what happens first: we diamond-grind every slab (never acid etching), repair the cracks properly, and give our penetrating epoxy base time to bond before sealing it under a UV-stable polyaspartic topcoat. DFW Coatings is a DBA of DFW Custom Homes LLC, a registered and insured Fort Worth contractor, and every floor carries a one-year warranty. We also serve Burleson up the interstate, plus Granbury and Weatherford to the west.

Call Us: (817) 575-1024 Get My Free Quote

Cleburne Coating Questions

What Johnson County homeowners and shop owners ask us most.

Yes — the Chisholm Trail Parkway puts Cleburne about half an hour from our Fort Worth shop, and we install garage floor and epoxy coatings across all of Johnson County: Cleburne, Joshua, Godley, Keene, Grandview, Rio Vista, and Alvarado. No trip charge anywhere in the county.

Simple flat rates, everything included: flake floors at $9 per square foot, premium flake blends at $10, and quartz at $15. Surface prep, crack repair, and all three coats — in any of our colors — are baked into that number. A standard two-car garage comes out around $3,960 — and the on-site estimate is free anywhere in Johnson County.

That's home turf for us. Johnson County is full of shops, barns, and metal buildings on concrete slabs, and they're some of our favorite installs — big open floors where a coating makes cleanup effortless. Quartz is the workhorse choice for slip resistance under dust and fluids; flake gives a shop that showroom finish.

Almost never. Older Cleburne homes often have slabs with decades of cracks, stains, and surface wear — exactly what our prep process is built for. We diamond-grind away the damaged surface, fill and profile the cracks, and rebuild the floor as a bonded four-layer system. If a slab needs repair beyond the routine work included in our rate, we price it up front at your free estimate.

Concrete paint is a thin film that sits on the surface — it looks fine for a season, then peels wherever tires or moisture touch it. A coating system is structural by comparison: we grind the slab open, soak an epoxy base into the concrete, embed a flake or quartz wear layer, and seal it under a UV-stable polyaspartic topcoat. It costs more than a bucket of paint, and it lasts 15+ years instead of 15 months.

Most Cleburne installs run two days — grind, repair, base coat, and color layer on day one, polyaspartic topcoat on day two. You're walking on it about 24 hours after the final coat and parking on it shortly after.

Ready for a new floor in Cleburne?

We'll measure the slab, check its condition, and leave you a firm all-inclusive price. Estimates are free anywhere in Johnson County.

Get My Free Quote Call (817) 575-1024

Get Your Free Quote

Fill out the form below and we'll get back to you within 24 hours to schedule your free on-site estimate.

By submitting this form, you agree to our terms and conditions and privacy policy.

Call Now Get My Free Quote